2 Pack Atomization Disc mist maker Ultrasonic Atomization Module Ultrasonic fogger DIY Humidifier with PCB 5V

How to Use It 1. Use 5V power supply to connect to the atomizer board module. 2. Place the atomizer on a shallow surface or sponge in water. Note that the welding surface of the atomizer plate faces upwards. 3. Press the key to start it. Then Enjoy Your Soft Moist Air. Parameters: 1.Work Voltage:DC 4.5V~5.5V 2.Work Power:2W 3.Power Type:Female Micro USB Socket 4.Spray Diameter:5um 5.Spray hole:740 holes 6.Spray speed:50ml/h 7.Work Temperature:0℃~85℃ 8.Work Humidity:10%~90%RH 9.Driver Size:35*19*15mm Application: 1.USB humidifier 2.Perfume atomizer 3.Aromatherapy atomizer 4.Auto parts 5.High-end toys with large amount of humidifier

• Widely used in the ultrasonic atomization devices, USB humidifier, perfume atomizer, aromatherapy atomizer and other atomization devices.
• It can work well over the water's surface, absorbent sponge or towelwith more finer particles and higher spray level.
• It Is A 108KHz 20mm Micro USB Humidifier With Driver. It Will Keep Work after Power-ON.
• Distinguish the front and Back of the Atomizer. The front Has White Piezoelectric Ceramic Ring and Pads. Place the Atomizer on the Surface of the Water and Cannot Be Placed in Water. Backside Contact Water Surface. Provide Power Supply Form Micro USB.It Will Keep Work after Power-ON.
• Work Voltage:DC 4.5V~5.5V, Work Temperature:0℃~85℃, Work Humidity:10%~90%RH.